Users Guide

clear storm-control pfc statistics
Clears the discard state count and cleared count statistics. If the queue is in discard state during clear, the discard state count will start
from 1.
Syntax
clear storm-control pfc statistics stack-unit {unit-number} port-set {portpipe-
number}
Parameters
unit-number Enter the stack unit number.
portpipe-number Enter the port set number.
Defaults None
Command Modes EXEC Privilege.
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the S6000, S6000–ON, S6100–ON, Z9100–ON.
Usage Information The clear storm-control pfc statistics command is used to clear the discard count and cleared
count statistics on the specified stack unit and port set.
Related Commands show storm-control pfc statistics — used to view the statistical data of the PFC storm on the specified stack unit
and the port set.
show storm-control broadcast
Display the storm control broadcast configuration.
Syntax
show storm-control broadcast [interface]
Parameters
interface (OPTIONAL) Enter one of the following interfaces to display the interface-specific storm
control configuration:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet
then the slot/port/subport information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
1506 Storm Control