Users Guide

Command Modes VXLAN INSTANCE
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
Related Commands vxlan-instance — Enable VXLAN Instance configuration on the platform.
local-vtep-ip
Set the local IP Address to be used as the source IP for VXLAN tunnels.
Syntax
local-vtep-ip IP Address
To disable the settings, use the no local-vtep-ip command.
Parameters
IP Address Enter the local IP Address to be used as a source for VXLAN tunnels.
Defaults None.
Command Modes VXLAN INSTANCE
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON, and
Z9100–ON.
Usage Information Use the local-vtep-ip IP Address command to set the local IP Address that would be used as source for
VXLAN tunnels.
max_backoff
Configures time to wait between connection attempts with controller.
Syntax
max_backoff time
Parameters
time Enter the time in milliseconds. The range is from 1000-180000. The default value is
30000.
Defaults 30000
1644 Virtual Extensible LAN (VXLAN)