Users Guide

vxlan-instance
Enable VXLAN Instance configuration on the platform.
Syntax
vxlan-instance instance ID
To delete vxlan-instance from the system, use no vxlan-instance instance ID command.
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the initial
release.
Defaults Disabled
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
Usage Information You must configure VXLAN globally before using VXLAN-instance. Use the no shutdown command to enable
the VXLAN instance.
Example
Enable VXLAN instance:
Dell(conf)#feature vxlan
Dell(conf)#vxlan-instance 1
Dell(conf-vxlan-inst-1)#no shutdown
Disable VXLAN instance:
Dell(conf)#no vxlan-instance 1
Related Commands feature vxlan — Enable VXLAN configuration globally on the platform.
vxlan-instance (VAP)
To configure a VXLAN-Access Port (VAP) in to VXLAN-instance
Syntax
vxlan-instance instance ID
To unconfigure VAP, use the no vxlan-instance 1 command.
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the initial
release.
Virtual Extensible LAN (VXLAN) 1647