Users Guide

Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.6.1.0 Introduced on the C-Series and S-Series.
7.4.1.0 Introduced on the E-Series.
Usage Information
When you configure the dot1x server-timeout value, take into account the communication medium used to
communicate with an authentication server and the number of RADIUS servers configured. Ideally, the dot1x
server-timeout
value (in seconds) is based on the configured RADIUS-server timeout and retransmit values
and calculated according to the following formula: dot1x server-timeout seconds > (radius-server
retransmit seconds + 1) * radius-server timeout seconds.
Where the default values are as follows: dot1x server-timeout (30 seconds), radius-server retransmit (3
seconds), and radius-server timeout (5 seconds).
Example
Dell(conf)# radius-server host 10.11.197.105 timeout 6
Dell(conf)# radius-server host 10.11.197.105 retransmit 4
Dell(conf)# interface tengigabitethernet 2/23/1
Dell(conf-if-te-2/23/1)# dot1x server-timeout 40
Dell(conf-if-te-2/23/1)#
dot1x static-mab
Enable static MAC authorization bypass (MAB) and configure static MAB profile to an interface.
Syntax
[no] dot1x static-mab profile profile-name
Parameters
profile profile-name Enter the keyword profile and the profile-name to configure the static MAB profile
name. The profile name length is limited to 32 characters.
Defaults Disabled.
Command Modes
INTERFACE
168 802.1X