Users Guide

Version Description
9.0.2.0 Introduced on the S6000.
Usage Information
This command reverses changes made with the boot change command.
BOOT_USER # boot zero primary
BOOT_USER # boot zero secondary
BOOT_USER # boot zero default
BOOT_USER # show bootvar
PRIMARY OPERATING SYSTEM BOOT PARAMETERS:
========================================
No Operating System boot parameters specified!
SECONDARY OPERATING SYSTEM BOOT PARAMETERS:
==========================================
No Operating System boot parameters specified!
DEFAULT OPERATING SYSTEM BOOT PARAMETERS:
========================================
No Operating System boot parameters specified!
BOOT_USER #
Related Commands
boot_change— Change the primary, secondary, or default boot image configuration.
default-gateway
Assign an IP address as the default gateway for the system.
Syntax
[no] default-gateway ip-address
Parameters
ip-address
Enter the IP address of the gateway router in dotted decimal format (A.B.C.D).
Command Modes BOOT_USER
Command History
Version Description
9.8(1.0) Introduced on the Z9100–ON.
314 Boot Command Line Interface