Users Guide

Command Modes CONTROL-PLANE-CPUQOS
Parameters
profile-name Enter the unique profile name for the CoPP policy that you want to create.
NOTE: The length of the profile name that you specify cannot exceed 32
characters.
Command History
Version Description
9.11.0.0 Introduced on the S6000, S6000–ON, Z9100–ON, and S6100–ON.
Usage Information
Following are the prerequisite for applying a CoPP policy:
• Ensure that the protocols are not running. If protocols are running, issues such as, packets arriving out of
order, may occur.
• Ensure that the service-class cpu-queue-buffer command is not configured. The copp-policy
command will not be available if the service-class cpu-queue-buffer command is configured.
• Ensure that the service-policy rate-limit-cpu-queues command is not configured, The copp-
policy command will not be available if the service-policy rate-limit-cpu-queues is
configured.
• You cannot associate a protocol group with more than one queue.
• Ensure that each queue contains a unique protocol list. A protocol cannot be configured in more than one
queue.
NOTE: The protocols that are not mapped to the CPU queues are mapped to Queue 0.
Example
Dell(conf)#control-plane-cpuqos
Dell(conf-control-cpuqos)#copp-policy COPP
Dell(conf-control-cpuqos)#show config
!
control-plane-cpuqos
copp-policy COPP
Dell(conf-control-cpuqos)#
protocol-list
Creates a protocol list to be configured under a protocol group.
Syntax
protocol-list protocol-name1, protocol-name2,.....
Use the no protocol-list command to remove the protocols from the protocol-group.
Command Modes CPU-PROTOCOL-GROUP
Parameters
protocol-name1,
protocol-name2, ...
Enter the list of protocols to be associated with the protocol group.
NOTE: When you specify multiple protocols to be associated with a protocol-
group profile, you must de-limit each protocol name with only a coma.
Command History
Version Description
9.11.0.0 Introduced on the S6000, S6000–ON, Z9100–ON, and S6100–ON.
Control Plane Policing (CoPP) 451