Users Guide

Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on the E-Series.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Introduced
Example
Dell# show interfaces dampening
Interface Supp Flaps Penalty Half-Life Reuse Suppress Max-Sup
State
Te 1/2/1 Up 0 0 20 800 4500 120
Te 1/10/1 Up 0 0 5 750 2500 20
Dell#
Related Commands
• dampening — configure dampening on an interface.
• show interfaces — display information on a specific physical interface or virtual interface.
• show interfaces configured — display any interface with a non-default configuration.
show interfaces stack-unit
Display information on all interfaces on a specific S-Series or Z-Series stack member.
Syntax
show interfaces stack-unit unit-number
Parameters
unit-number Enter the stack member number.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
692 Interfaces