Administrator Guide

RX - Ingress Dropped Packet 0
RX - MTU Check Error Frame Counter 0
RX - PFC Frame Priority 0 0
RX - PFC Frame Priority 1 0
RX - PFC Frame Priority 2 0
RX - PFC Frame Priority 3 0
RX - PFC Frame Priority 4 0
RX - PFC Frame Priority 5 0
RX - PFC Frame Priority 6 0
RX - PFC Frame Priority 7 0
RX - Debug Counter 0 0
RX - Debug Counter 1 0
RX - Debug Counter 2 0
<output truncated for brevity>
show hardware drops
Displays internal drops on the specified interface or for a range of interface.
Syntax
show hardware drops interface interface
Parameters
drops
Enter the keyword drops to display internal drops.
interface
Enter any of the following keywords and the interface or interface range information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port/subport information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.14(0.0) Included the FEC BER details in the output for 25 and 50GG interfaces of the S5048–
ON.
9.12(1.0) Introduced on the S5048F–ON.
9.11(0.0)
Included the FEC BER details in the output for 100G interfaces of S6100–ON and Z9100–
ON .
Included FCS Error Ratio in the output for all interfaces of S6000, S6000–ON, S6100–
ON, and Z9100–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.8(0.0) Removed the keywords stack-unit. Introduced on the Z9500.
9.7(0.0) Introduced on the S6000-ON.
514 Debugging and Diagnostics