Service Manual

bandwidth that is aggregated. This aggregated bandwidth enables brief durations of burst trac that
exceeds the peak rate and committed burst. Committed rate refers to the guaranteed bandwidth for trac
entering or leaving the interface under normal network conditions. When trac propagates at an average
rate that is less than or equal to the committed rate, it is considered to be green-colored or coded. When the
transmitted trac falls below the committed rate, the bandwidth, which is not used by any trac that is
traversing the network, is aggregated to form the committed burst size. Trac is considered to be green-
colored up to the point at which the unused bandwidth does not exceed the committed burst size.
Related Commands
rate shape — shapes trac output as part of the designated policy.
qos-policy-output — creates a QoS output policy.
service-policy input
Apply an input policy map to the selected interface.
S6000–ON
Syntax
service-policy input policy-map-name [layer2]
To remove the input policy map from the interface, use the no service-policy input policy-
map-name [layer2] command.
Parameters
policy-map-name Enter the name for the policy map in character format (32 characters maximum).
You can identify an existing policy map or name one that does not yet exist.
layer2 (OPTIONAL) Enter the keyword layer2 to specify a Layer 2 Class Map. The
default is Layer 3.
Defaults Layer 3
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 E-Series Only: Expanded to add support for Layer 2.
1174
Quality of Service (QoS)