Service Manual

To remove the threshold values, use the no threshold min number max number command.
Parameters
min number Enter the keyword min then the minimum threshold number for the WRED prole.
The range is from 1 to 9360.
max number Enter the keyword max then the maximum threshold number for the WRED prole.
The range is from 1 to 9360 KB.
max-drop-
probability number
Enter the keyword max-drop-probability followed by the maximum number of
packets for the WRED prole. The range is from 0 to 100 KB
Defaults none
Command Modes CONFIGURATION (cong-wred)
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
6.1.1.1 Introduced on the E-Series.
Usage Information To congure the minimum and maximum threshold values for user-dened proles, use this command.
Additionally, to modify the minimum and maximum threshold values for the pre-dened WRED proles, use
this command. If you delete the threshold values of the pre-dened WRED proles, the proles revert to
their original default values.
Table 2. Threshold Values for the Pre-dened WRED Proles
Pre-Dened WRED Prole
Name
Minimum Threshold Maximum Threshold Maximum Drop Rate
wred_drop 0 0 100
wred_teng_y 594 5941 100
wred_teng_g 594 5941 50
wred_fortyg_y 594 5941 50
wred_fortyg_g 594 5941 25
Related Commands wred-prole — creates a WRED prole.
1190
Quality of Service (QoS)