Service Manual

rate shape
Dene the rate-shaping method to be either as a measure of bytes or packets for each of the hierarchical QoS (HQoS) nodes at the
leaf level to be applied to each queue.
S6000–ON
Syntax
[no] rate-shape [kbps | pps] peak-rate [burst-KB/Packets] [committed [kbps
| pps] committed-rate [burst-KB/Packets]]
Parameters
kbps Enter the keyword kbps to specify the committed rate limit in Kilobits per second
(Kbps). Specify this value as a multiple of 64. The range is from 0 to 40000000.
The default granularity is Megabits per second (Mbps).
pps Enter the keyword pps to specify the committed rate limit in packets per second
(pps). The range is from 1 to 268000000. The default granularity is Megabits per
second (Mbps).
committed-rate Dene the committed rate, which is the guaranteed or minimum conrmed rate for
the packets. Specify this value as a multiple of 64 if you specify the committed rate
in Kbps. The range is from 0 to 40000000 for Kbps. The range is from 1 to
268000000 for pps. The range is from 0 to 40000 for Mbps (which is the default
measure for rate limits if you do not explicitly congure Kbps or pps)
burst-KB (OPTIONAL) Enter the committed burst size in KB. The range is from 0 to 10000.
The default is 50 KB. The default peak burst is regarded as the same value as the
congured committed burst size.
Packets (OPTIONAL) Enter the committed burst size as a count of packets. The range is
from 1 to 1073000. The default is 50 packets. The default peak rate is regarded as
the same value as the congured committed rate.
peak-rate Dene the peak rate, which is the guaranteed or minimum conrmed rate for the
packets. Specify this value as a multiple of 64 if you specify the peak rate in Kbps.
The range is from 0 to 40000000 for Kbps. The range is from 1 to 268000000 for
pps. The range is from 0 to 40000 for Mbps (which is the default measure for rate
limits if you do not explicitly congure Kbps or pps)
kbps Enter the keyword kbps to specify the peak rate limit in Kilobits per second (Kbps).
Specify this value as a multiple of 64. The range is from 0 to 40000000. The
default granularity is Megabits per second (Mbps).
pps Enter the keyword pps to specify the peak rate limit in packets per second (pps).
The range is from 1 to 268000000. The default granularity is Megabits per second
(Mbps).
peak-rate Dene the peak rate, which is the guaranteed or minimum conrmed rate for the
packets. Specify this value as a multiple of 64 if you specify the peak rate in Kbps.
The range is from 0 to 40000000 for Kbps. The range is from 1 to 268000000 for
pps. The range is from 0 to 40000 for Mbps (which is the default measure for rate
limits if you do not explicitly congure Kbps or pps)
burst-KB (OPTIONAL) Enter the peak burst size in KB. The range is from 0 to 10000. The
default is 50 KB.
Packets (OPTIONAL) Enter the peak burst size as a count of packets. The range is from 1
to 1073000. The default is 50 packets. The default peak rate is regarded as the
same value as the congured peak rate.
1196
Quality of Service (QoS)