Service Manual

Defaults Soft forwarding is enabled.
Command Modes CONFIGURATION
Command History
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage Information All the default catch-all entries in the longest prex match (LPM) table collect and transmit all unresolved
IPv6 packets to the CPU, even if they are destined for unknown destinations.
description
Specify a name for a customer VRF.
Syntax
description string
To delete the descriptive name for a customer VRF, use the no description string command.
Parameters
string Enter a descriptive name for the VRF.
Defaults None.
Command Modes VRF MODE
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Introduced on the Z9500.
9.4.(0.0) Introduced on the S-Series.
ip vrf forwarding
Attach an interface to a VRF.
Syntax
ip vrf forwarding {vrf-name | management}
1496
Virtual Routing and Forwarding (VRF)