Service Manual

terminal Enter the keyword terminal to copy the current running conguration to the
terminal. This command is similar to the show running-config command.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information The write memory command saves the running-conguration to the le labeled startup-conguration.
When using a LOCAL CONFIG FILE other than the startup-cong not named “startup-conguration” (for
example, you used a specic le during the boot config command), the running-cong is not saved to
that le; use the
copy command to save any running-conguration changes to that local le.
150
Control and Monitoring