Service Manual

Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Added support to display the interface congurations corresponding to a range of
ports.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.5.1.0 Introduced on the E-Series.
Example
Dell#show interfaces status
Port Description Status Speed Duplex Vlan
Te 1/1/1 Up 1000 Mbit Auto --
Te 1/2/1 Down Auto Auto 1
Te 1/3/1 Down Auto Auto 1
Te 1/4/1 Down Auto Auto --
Te 1/5/1 DellPort Up 1000 Mbit Auto 30-130
Te 1/6/1 Down Auto Auto --
Te 1/7/1 Down Auto Auto --
Te 1/8/1 Up 1000 Mbit Auto 1502,1504,1506-1508,1602
Te 1/9/1 Down Auto Auto --
Te 1/10/1 Down Auto Auto --
Te 1/11/1 Down Auto Auto --
Te 1/12/1 Down Auto Auto --
Te 1/13/1 Down Auto Auto --
Te 1/14/1 Down Auto Auto --
Te 1/15/1 Down Auto Auto --
Te 1/16/1 Down Auto Auto -Dell#
Related Commands
show interfaces — displays information on a specic physical interface or virtual interface.
show interfaces vlan
Display VLAN statistics.
Syntax
show interfaces vlan {vlan-id} [LINE] {description}
658
Interfaces