Service Manual

0 2 00:03:00:00:00:02 Po 10 20
00:01:00:00:00:02 Te 3/12/1 1000
Dell#
show ip b stack-unit
View all Forwarding Information Base (FIB) entries of a specic stack-unit.
Syntax
show ip fib stack-unit id vrf vrf-name [ip-address [mask] [longer-prefixes]
| summary]
Parameters
id Enter the S-Series stack unit ID. The unit ID range is from 1 to 6.The unit ID range is
from 1 to 6.
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to view FIB entries
corresponding to that VRF.
ip-address mask (OPTIONAL) Enter the IP address of the network destination to view only
information on that destination. Enter the IP address in dotted decimal format
(A.B.C.D). Enter the mask in slash prex format (/X).
longer-prexes (OPTIONAL) Enter the keywords longer-prefixes to view all routes with a
common prex.
summary (OPTIONAL) Enter the keyword summary to view the total number of prexes in
the FIB.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Added support for up to seven stack members.
IPv4 Routing
733