Service Manual
ip-address mask (OPTIONAL) Enter the next-hop address in dotted decimal format and enter a
mask in either dotted decimal or /prex format.
prex-list (OPTIONAL) Enter the name of a prex list name.
Defaults weight = 115
Command Modes
• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
6.3.1.0 Introduced.
Usage Information The administrative distance indicates the trust value of incoming packets. A low administrative distance
indicates a high trust rate. A high value indicates a lower trust rate. For example, a weight of 255 is
interpreted that the routing information source is not trustworthy and should be ignored.
distribute-list in
Filter network prexes received in updates.
Syntax
distribute-list prefix-list-name in [interface]
To return to the default values, use the no distribute-list prefix-list-name in
[interface] command.
Parameters
prex-list-name Specify the prex list to lter prexes in routing updates.
interface (OPTIONAL) Identies the interface type slot/port[/subport] as one of the
following:
Intermediate System to Intermediate System (IS-IS)
785