Service Manual

connected (OPTIONAL) Enter the keyword connected for directly connected routing
process.
ospf process-id (OPTIONAL) Enter the keyword ospf then the OSPF process-ID number. The
range is from 1 to 65535.
bgp as number (OPTIONAL) Enter the BGP then the AS Number. The range is from 1 to 65535.
rip (OPTIONAL) Enter the keyword rip for RIP routes.
static (OPTIONAL) Enter the keyword static for user-congured routing process.
Defaults Not congured.
Command Modes
• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
7.5.1.0 Added IPv6 ISIS support.
6.3.1.0 Introduced.
Usage Information You can assign a name to a routing process so a prex list IS applied to only the routes derived from the
specied routing process.
Related Commands
• distribute-list in — lters the networks received in updates.
• redistribute — redistributes routes from one routing domain to another routing domain.
distribute-list redistributed-override
Suppress apping of routes when the same route is redistributed into IS-IS from multiple routers in the network.
Syntax
distribute-list redistributed-override in
To return to the default, use the no distribute-list redistributed-override in command.
Defaults none
Intermediate System to Intermediate System (IS-IS)
787