Service Manual

rip Enter the keyword rip to redistribute RIP routes into IS-IS.
static Enter the keyword static to redistribute user-congured routes into IS-IS.
metric metric-value (OPTIONAL) Assign a value to the redistributed route. The range is from 0 to
16777215. The default is 0. Use a value that is consistent with the destination
protocol.
metric-type
{external | internal}
(OPTIONAL) The external link type associated with the default route advertised
into a routing domain. Specify one of the following:
• external
• internal
level-1 (OPTIONAL) Routes are independently redistributed into IS-IS as Level 1 routes.
level-1-2 (OPTIONAL) Routes are independently redistributed into IS-IS as Level-1-2 routes.
level-2 (OPTIONAL) Routes are independently redistributed into IS-IS as Level 2 routes.
This setting is the default.
route-map map-
name
(OPTIONAL) If you do not enter the route-map argument, all routes are
redistributed. If a map-name value is not specied, no routes are imported.
Defaults
• metric metric-value = 0
• metric-type= internal; level-2
Command Modes
• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.12.0 Introduced on the S4810.
7.5.1.0 Added support for IPv6 ISIS.
6.3.1.0 Introduced.
Usage Information
To redistribute a default route (0.0.0.0/0), congure the default-information originate
command.
818
Intermediate System to Intermediate System (IS-IS)