Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S6000 ON

941

942

943

944

945

946

947

948

949

950

• For a port channel interface, enter the keywords port-channel then a

number.

• For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port/subport information.

• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the

slot/port information.

count value Enter the keyword count then the number of debug outputs. The range is from 1

to 65534. The default is innity.

Defaults none

Command Modes EXEC Privilege

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the Z9500.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9000

switches.

device-role

Specify the role of the device attached to the port.

Syntax

device-role {host | router}

To reset the device role, use the no device-role {host | router} command.

Parameters

host Enter the keyword host to set the device-role as host.

router Enter the keyword router to set the device-role as router.