Service Manual

Parameters
value Enter the maximum transmission unit value in bytes. The range is from 1,280 to
11,982 bytes.
Defaults 0
Command Modes POLICY LIST CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the Z9500.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and Z9000 switches.
Related Commands
• ipv6 nd ra-guard enable — Allows you to congure the RA guard related commands.
• ipv6 nd raguard policy policy-name — Denes the RA guard policy name and enter the RA guard policy
conguration mode.
other-cong-ag
Enable the verication of the advertised other conguration parameter. If this command is not congured, the verication process is
bypassed.
Syntax
other-config-flag {on | off}
To reset the other conguration parameter, use the no other-config-flag {on | off} command.
Parameters
on Enter the keyword on to set the other-cong-ag value as ON.
o Enter the keyword off to set the other-cong ag value as OFF.
Defaults none
Command Modes POLICY LIST CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the Z9500.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
950
Neighbor Discovery Protocol (NDP)