Users Guide

• (OPTIONAL) To clear statistics for all VRRP groups configured, enter the keyword vrrp. Enter a number from 1 to 255 as the
vrid.
• (OPTIONAL) To clear unknown source address (SA) drop counters when you configure the MAC learning limit on the interface,
enter the keywords learning-limit.
Example of the clear counters Command
When you enter this command, confirm that you want Dell Networking OS to clear the interface counters for that interface.
Dell#clear counters te 1/1/1
Clear counters on TenGigabitEthernet 1/1/1 [confirm]
Dell#
Compressing Configuration Files
You can optimize and reduce the sizes of the configuration files.
You can compress the running configuration by grouping all the VLANs and the physical interfaces with the same property. Support to
store the operating configuration to the startup config in the compressed mode and to perform an image downgrade without any
configuration loss are provided.
You can create groups of VLANs using the interface group command. This command will create nonexistent VLANs specified in a
range. On successful command execution, the CLI switches to the interface group context. The configuration commands inside the group
context will be the similar to that of the existing range command.
Two existing exec mode CLIs are enhanced to display and store the running configuration in the compressed mode.
show running-config compressed and write memory compressed
The compressed configuration will group all the similar looking configuration thereby reducing the size of the configuration. For this release,
the compression will be done only for interface related configuration (VLAN & physical interfaces)
The following table describes how the standard and the compressed configuration differ:
Table 40. Standard and Compressed Configurations
int vlan 2
no ip address
no shut
int vlan 3
tagged te 1/1/1
no ip address
shut
int vlan 4
tagged te 1/1/1
no ip address
shut
int vlan 5
tagged te 1/1/1
no ip address
shut
int vlan 100
no ip address
no shut
int vlan 1000
ip address 1.1.1.1/16
no shut
int te 1/1/1
no ip address
switchport
shut
int te 1/2/1
no ip address
shut
int te 1/3/1
no ip address
shut
int te 1/4/1
no ip address
shut
int te 1/10/1
no ip address
shut
int te 1/34/1
ip address 2.1.1.1/16
shut
Dell# show running-config
<snip>
!
interface TenGigabitEthernet 1/1/1
no ip address
Dell# show running-config compressed
<snip>
!
interface TenGigabitEthernet 1/1/1
no ip address
Interfaces 391