Users Guide

MIB Object OID Description
dot3adAggActorAdminKey 1.2.840.10006.300.43.1.1.1.1.5 Contains a 16–bit read–write value which is
the current administrative key.
dot3adAggActorOperKey 1.2.840.10006.300.43.1.1.1.1.6 Contains a 16–bit read–write value which is
the operational key.
dot3adAggPartnerSystemID 1.2.840.10006.300.43.1.1.1.1.7 Contains a six octet read–only MAC address
value consisting of an unique identifier for
the current Protocol partner of the
Aggregator.
dot3adAggPartnerSystemPriority 1.2.840.10006.300.43.1.1.1.1.8 Contains a two octet read–only value that
indicates the priority value associated with
the Partner’s system ID.
dot3adAggPartnerOperKey 1.2.840.10006.300.43.1.1.1.1.9 Contains the current operational value of
the key for the Aggregator’s current
protocol partner.
dot3adAggCollectorMaxDelay 1.2.840.10006.300.43.1.1.1.1.10 Contains a 16–bit read–write attribute
defining the maximum delay, in tens of
microseconds, that may be imposed by the
frame collector between receiving a frame
from an Aggregator Parser, and either
delivering the frame to its MAC Client or
discarding the frame.
dot3adAggPortListTable 1.2.840.10006.300.43.1.1.2 Contains a list of all the ports associated
with each Aggregator. Each LACP channel
in a device occupies an entry in the table.
dot3adAggPortListEntry 1.2.840.10006.300.43.1.1.2.1 Contains a list of ports associated with a
given Aggregator and indexed by the
ifIndex of the Aggregator.
dot3adAggPortListPorts 1.2.840.10006.300.43.1.1.2.1.1 Contains a complete set of ports currently
associated with the Aggregator.
Viewing the LAG MIB
• To view the LAG MIB generated by the system, use the following command.
snmpbulkget -v 2c -c LagMIB 10.16.148.157 1.2.840.10006.300.43.1.1.1.1.1
iso.2.840.10006.300.43.1.1.1.1.1.1258356224 = Hex-STRING: 00 01 E8 8A E8 46
iso.2.840.10006.300.43.1.1.1.1.1.1258356736 = Hex-STRING: 00 01 E8 8A E8 46
iso.2.840.10006.300.43.1.1.1.1.2.1258356224 = INTEGER: 32768
iso.2.840.10006.300.43.1.1.1.1.2.1258356736 = INTEGER: 32768
iso.2.840.10006.300.43.1.1.1.1.3.1258356224 = Hex-STRING: 00 01 E8 8A E8 44
iso.2.840.10006.300.43.1.1.1.1.3.1258356736 = Hex-STRING: 00 01 E8 8A E8 44
iso.2.840.10006.300.43.1.1.1.1.4.1258356224 = INTEGER: 1
iso.2.840.10006.300.43.1.1.1.1.4.1258356736 = INTEGER: 1
iso.2.840.10006.300.43.1.1.1.1.5.1258356224 = INTEGER: 127
iso.2.840.10006.300.43.1.1.1.1.5.1258356736 = INTEGER: 128
MIB Support for PFC Storm Control
Dell Networking provides MIB objects to display the information for PFC Storm Control. The OIDs specific to PFC Storm Control are
appended to the dellNetFpStatsMib. These statistics can also be obtained by using the CLI commands: show storm-control pfc status
Simple Network Management Protocol (SNMP)
833