Users Guide

Version Description

9.11(0.0) Introduced on the C9010.

9.9(0.0) Introduced on the Z9500.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9000 switches.

Related Commands

• ipv6 nd raguard policy policy-name — dene the RA guard policy name and enter the RA guard policy

conguration mode.

• ipv6 nd ra-guard enable — congure the RA guard related commands.

hop–limit

Enable the verication of the advertised hop count limit. If this command is not congured, the verication process is bypassed.

Syntax

hop-limit {maximum | minimum limit}

To reset the hop count limit, use the no hop-limit {maximum | minimum limit} command.

Parameters

maximum limit Enter the keyword maximum then the hop limit value. The range is from 0 to 254.

minimum limit Enter the keyword minimum then the hop limit value. The range is from 0 to 254.

Defaults None

Command Modes POLICY LIST CONFIGURATION

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.