Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S6000 ON

1001

ipv6 nd ra–guard attach–policy

Apply the IPv6 RA guard to a specic interface.

Syntax

ipv6 nd ra-guard attach—policy policy-name [vlan [vlan 1, vlan 2, vlan 3.....]]

Parameters

policy policy-name Enter the keyword policy then the policy name. The policy-name allows a maximum of

140 characters.

vlan [vlan 1, vlan 2,

vlan 3........]

Enter the keyword vlan then the VLAN range. The VLAN range is from 1 to 4094.

Defaults None

Command Modes INTERFACE

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.11(0.0) Introduced on the C9010.

9.9(0.0) Introduced on the Z9500.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9000 switches.

Related Commands

• show ipv6 nd ra-guard policy — display the conguration applied on all the RA guard policies or a specic RA

guard policy.

ipv6 nd ra–guard enable

Allow you to congure the RA guard related commands.

Syntax

ipv6 nd ra-guard enable

To disable the RA guard, use the no ipv6 nd ra-guard enable command.

Defaults Disabled

Command Modes CONFIGURATION