Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S6000 ON

1031

Ouput Description

Last Change Time since the last change in the state of the tracked object.

Example (Brief)

Dell# show track ipv6 route brief

ResId Resource Parameter State LastChange

2 IPv6 route metric threshold 2040::/64 Up 00:02:36

3 IPv6 route reachability 2050::/64 Up 00:02:36

Related Commands

• show running-cong track – display conguration information about tracked objects.

• show track – display information about tracked objects, including conguration, current state, and clients which

track the object.

• track interface ipv6 routing – congure object tracking on the routing status of an IPv6 Layer 3 interface.

• track ipv6 route metric threshold – congure object tracking on the threshold of an IPv6 route metric.

• track ipv6 route reachability – congure object tracking on the reachability of an IPv6 route.

track interface ipv6 routing

Congure object tracking on the routing status of an IPv6 Layer 3 interface.

Syntax

track object-id interface interface ipv6 routing

To return to the default setting, use the no track object-id command.

Parameters

object-id Enter the ID number of the tracked object. The range is 1 to 500.

interface Enter one of the following values:

• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then

the slot/port/subport information.

• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/

port information.

•

For a Loopback interface, enter the keyword loopback then a number from 0 to

16383.

• For a port channel interface, enter the keywords port-channel then a number.

• For a tunnel interface, enter the keyword tunnel.

• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.

Defaults None

Command Modes CONFIGURATION

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

Object Tracking 1035