Users Guide

Version Description
7.8.1.0 Introduced on the S-Series.
Usage Information This command is applied to the subsequent PIM-BSR. Existing BSR advertisements are cleaned up by time-out. To
clean the candidate RP advertisements, use the clear ip pim rp-mapping command.
ip pim bsr-candidate
To join the Bootstrap election process, congure the PIM router.
Syntax
ip pim [vrf vrf-name] bsr-candidate interface [hash-mask-length] [priority]
To return to the default value, use the no ip pim bsr-candidate [vrf vrf-name] command.
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of the VRF to congure the
PIM router on a VRF.
interface Enter the following keywords and slot/port or number information:
• For a Loopback interface, enter the keyword loopback then a number from 0 to
16383.
• For a Port Channel interface, enter the keywords port-channel then a number.
•
For a VLAN, enter the keyword vlan then a number from 1 to 4094.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port/subport information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
hash-mask-length (OPTIONAL) Enter the hash mask length. The range is from zero (0) to 32. The default is
30.
priority (OPTIONAL) Enter the priority used in Bootstrap election process. The range is from zero
(0) to 255. The default is zero (0).
Defaults Not congured.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added support for VRF. Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
1170 PIM-Sparse Mode (PIM-SM)