Users Guide

show storm-control pfc status
You can view the status of the PFC storm on a stack unit with specic port set.
Syntax
show storm-control pfc status stack-unit {unit-number} port-set {portpipe-number}
Parameters
unit-number Enter the stack unit number.
portpipe-number Enter the port set number.
Defaults None
Command Modes EXEC Privilege.
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking OS Command
Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6000, S6000–ON, S6100–ON, Z9100–ON.
Usage Information The show storm-control pfc status command is used to view the status of the PFC storm on the specied stack unit
and the port set.
Example
Dell#show storm-control pfc status stack-unit 1 port-set 0
-------------------------------------------------------------------------------------------------------
Interface Priority State Duration in discard state(in ms) Pkts Dropped(Ingress) Pkts Dropped(Egress) Pkts
Dropped(Ingress,Cumulative) Pkts
Dropped(Egress,Cumulative)-------------------------------------------------------------------------------------------------------
Fo 1/32/1 4 Drop 1194740 2389 135759218588
2389 135759218588
Fo 1/1/1 4 Normal 0 0 0
0 0
Fo 1/17/1 4 Normal 0 0 0
0 0
clear storm-control pfc drop-counters
Clears all the ingress & egress drop counters and time since discard. The counters are reset and started afresh from 0.
Syntax
clear storm-control pfc drop-counters stack-unit {unit-number} port-set
{portpipe-number}
Parameters
unit-number Enter the stack unit number.
portpipe-number Enter the port set number.
Defaults None
Command Modes EXEC Privilege.
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the S6000, S6000–ON, S6100–ON, Z9100–ON.
1518 Storm Control