Users Guide

Command History This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide
Version Description
9.11(0.0) Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON, and
Z9100–ON.
Usage Information Use this command to clear the remote VTEP and access port statistics.
clear mac-address-table dynamic all
Clear the MAC address table of all MAC address learned dynamically. It clears both MAC address of the VXLAN and legacy VLAN.
Syntax
clear mac-address-table dynamic all
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the initial
release.
Command Modes EXEC Privilege
Command History This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
controller
Congures controller for the VXLAN instance on the platform.
Syntax
controller controller ID ip address port port-number tcp|ptcp|pssl|ssl
Parameters
controller ID Enter the controller ID.
ip address Enter the IP address of the controller.
port port-number (OPTIONAL) Enter the keyword port and the port number.
The range is from 1 to 6632. The default port number is 6632.
tcp (OPTIONAL) Enter the keyword tcp to congure tcp connection to controller.
ptcp (OPTIONAL) Enter the keyword ptcp to congure passive tcp connection to controller.
pssl (OPTIONAL) Enter the keyword pssl to congure passive ssl connection to controller.
ssl (OPTIONAL) Enter the keyword ssl to congure ssl connection to controller (Default).
Virtual Extensible LAN (VXLAN) 1655