Users Guide

Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
Usage Information The retry interval value caps at the value congured on the max-backo.
Related Commands vxlan-instance — Enable VXLAN Instance conguration on the platform.
remote-vtep-ip
Create a remote VTEP and associate it to specied VNIDs.
Syntax
remote—vtep—ip IP Address vni-profile profile name
To delete the remote VTEP, use the no remote—vtep—ip command.
Parameters
IP Address Enter the IP Address of the remote VTEP.
vni-prole Enter the keyword vni-profile followed by the prole name to which the remote
VTEP has to be associated.
Defaults None.
Command Modes VXLAN-INSTANCE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON, and
Z9100–ON.
Usage Information Use this command to associate a specic VNID to a remote VTEP. Provide a valid prole name while associating to
the remote VTEP.
NOTE: The remote VTEP IP Address cannot be any of the local IP Addresses congured in the
switch.
vnid
Associate a range of VNID numbers to a specic VNI prole.
Syntax
vnid VNID-Range
Virtual Extensible LAN (VXLAN) 1659