Users Guide

Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.4(0.0) Introduced on the S6000.
Usage Information You must disable vxlan-instance before unconguring VAP.
Related Commands feature vxlan — Enable VXLAN conguration globally on the platform.
vxlan-instance static
Enable VXLAN instance conguration to be static on the platform.
Syntax
vxlan-instance instance ID [static]
To delete VXLAN instance from the system, use no vxlan-instance instance ID command.
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the initial
release.
static Enter the keyword static to set the VXLAN instance in static mode.
Defaults Controller mode.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON, and
Z9100–ON.
Usage Information
By default, VXLAN instance is created in controller mode. You need a controller to congure VTEP. When you
create VXLAN instance in static mode, you can congure VTEP through CLIs.
Use the no shutdown command to enable the VXLAN instance.
Only one VXLAN instance can exist in a system.
You cannot modify a VXLAN instance mode. If you need to change the mode, you can delete the existing VXLAN
instance and create a new instance with the required mode.
Example
Enable VXLAN instance:
Dell(conf)#feature vxlan
Dell(conf)#vxlan-instance 1 static
Dell(conf-vxlan-inst-1)#no shutdown
Disable VXLAN instance:
Dell(conf)#no vxlan-instance 1 static
1662 Virtual Extensible LAN (VXLAN)