Users Guide

Related Commands vxlan-instance — Enable VXLAN Instance conguration on the platform.
show vxlan vxlan-instance statistics interface
Displays the port VLAN statistics information related to Network Virtualization Overlay (NVO) Gateway.
Syntax
show vxlan vxlan-instance instance ID statisitics interface interface VLAN-ID
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the initial
release.
interface Enter the following keywords and the interface information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port/subport information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
•
For a Port Channel, enter the keywords port-channel.
VLAN-ID Enter the VLAN ID.
Defaults Disabled
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON, and
Z9100–ON.
Example
Related Commands vxlan-instance- Enable VXLAN Instance conguration on the platform.
show vxlan vxlan-instance statistics remote-vtep-ip
Displays VXLAN statistics for a specic VXLAN tunnel.
Syntax
show vxlan vxlan-instance instance ID statistics remote-vtep-ip IP Address
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the initial
release.
remote-vtep-ip Enter the keyword remote-vtep-ip followed by the IP Address of the remote VTEP.
Command Modes
• EXEC
Virtual Extensible LAN (VXLAN) 1667