Users Guide
To delete a MAC access-group, use the no mac access-group mac-list-name command.
Parameters
access-list-name Enter the name of a congured MAC access list, up to 140 characters.
NOTE: This option is available only with the keyword in option.
vlan vlan-range (OPTIONAL) Enter the keyword vlan and then enter a range of VLANs. The range is
from 1 to 4094 (you can use IDs 1 to 4094).
NOTE: This option is available only with the keyword in option.
optimized Enter the keyword optimized to enable ACL optimization.
in Enter the keyword in to congure the ACL to lter incoming trac.
out Enter the keyword out to congure the ACL to lter outgoing trac.
NOTE:
1. If the MAC ACL is applied on VLAN, none of the VLAN members should have an access list applied for
that VLAN.
2. If the MAC ACL is applied on a Physical or Port Channel interface, the VLAN in which this port is
associated should not have an access list applied.
3. If the MAC ACL is applied on a VLAN, then that VLAN should not belong to VLAN ACL group.
4. If the MAC ACL is applied on a VLAN ACL group, then none of the VLANs in that group should have an
access list applied on it.
Defaults none
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.8.1.0 Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to
16 characters long.
222 Access Control Lists (ACL)