Users Guide
Version Description
9.0.2.0 Introduced on the S6000.
Usage Information
In the runtime CLI, use the ip address command in INTERFACE mode to change the Management interface’s IP
address.
To view the current IP address congured on the Management interface, enter the show interfaces management
ethernet command
Related Commands show_default-gateway — Display the IP address congured for the default gateway.
show_interface_mangement_ethernet— Display the IP address congured for the Management interface.
NVRAM erase
Erase all NVRAM contents alone.
Syntax nvram erase
Parameters
mac-address
Enter a MAC address in standard format.
Command Modes BOOT_ADMIN
Command History
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.0.2.0 Introduced on the S6000.
Usage Information
Use this command to assign a MAC address if FTOS cannot nd a default MAC address.
Example
BOOT_USER # BOOT_ADMIN # nvram erase
Are you sure (y/n)? : yes
Erasing NVRAM sectors....Erasing NvRam of size 1024 KB ... DONE
reload
Exit from this mode and reload Dell Networking OS.
Syntax
reload
Command Modes BOOT_USER
328 Boot Command Line Interface