Users Guide

show hardware pfc-nodrop-priority
View the packets drop count corresponding to the priority.
Syntax
show hardware pfc-nodrop-priority l2-dlf drops stack-unit stack-unit-number
port-set port-pipe
Parameters
stack-unit stack-
unit-number
Enter the keywords stack-unit and the stack unit number.
port-set port-pipe Enter the keywords port-set and port-pipe number. The port-pipe number is 0.
Command Modes
EXEC
EXEC Privilege
Command History
Version Description
9.10(0.0) Introduced on the C9010, S6000, S6000–ON, Z9100–ON and S6100–ON.
Example
Dell#show hardware pfc-nodrop-priority l2-dlf drops stack-unit 1 port-set 0
---------------------------------------------------
Priority DropCount
---------------------------------------------------
0 0
1 0
2 0
3 0
4 0
5 0
6 0
7 0
Related Commands pfc-nodrop-priority l2-dlf drop — congures to drop the unknown unicast packets ooding on lossless priorities.
show interface pfc
Displays the PFC conguration applied to ingress trac on an interface, including priorities and link delay.
Syntax
show interface port-type slot/port[/subport] pfc {summary | statistics | detail
| buffer-threshold}
Parameters
port-type slot/
port[/subport] pfc
Enter the port-type slot and port PFC information. Enter the subport number if a 40G
port is fanned-out into 10G ports.
{summary |
statistics | detail |
buer-threshold}
Enter the keyword summary for a summary list of results or enter the keyword detail
for a full list of results. Enter the keyword statistics to view pfc statistics. Use the
keyword
buffer-threshold to display the buer threshold details.
NOTE: This command also enables you to view information corresponding to a range of ports. However,
for Open Networking (ON) platforms the notation for specifying port range in the command is dierent
from how you specify in non-ON platforms.
Data Center Bridging (DCB) 477