Users Guide

EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.7(0.0) Introduced on the S6000-ON and Z9500.
9.3(0.0) Introduced on the S6000 platform.
Usage Information
The following table describes the output elds displayed for the show running-config dcb-buffer-
threshold command:
Field Description
Field Description
Prole name Name of the DCB buer threshold prole
Priority The priority of the queue for which the buer space settings apply
buer-size Ingress buer size
pause-threshold-
value
Buer limit at which the port sends the pause to peer in KB.
resume-threshold-
value
Buer oset limit at which the port resumes the peer in KB.
Example
Dell# show running—config dcb-buffer-threshold
!
dcb-buffer-threshold test1
pfc priority 0 buffer-size 40
pfc priority 3 buffer-size 50
!
dcb-buffer-threshold test2
pfc priority 0 buffer-size 80 pause-threshold 50
!
dcb-buffer-threshold test3
pfc priority 0 buffer-size 80 pause-threshold 60 resume-threshold 30
On interface on which PFC is enabled:
Dell(conf)#do show interfaces tengigabitethernet 1/3/2 pfc buffer-threshold
Interface TenGigabitEthernet 1/3/2
Interface Queue# Lossless Buffer-size Pause-threshold Resume-offset Shared Threshold
(KB) (KB) (KB) Weight
---------------------------------------------------------------------------------------------
Te 1/3/2 Q0 NO - - - -
Te 1/3/2 Q1 NO - - - -
Te 1/3/2 Q2 NO - - - -
Te 1/3/2 Q3 YES 200 40 9 8
Te 1/3/2 Q4 YES 200 40 9 8
Te 1/3/2 Q5 NO - - - -
Te 1/3/2 Q6 NO - - - -
Te 1/3/2 Q7 NO - - - -
Dell(conf)#
On interface in which PFC is not enabled:
Dell#show interface tengigabitethernet 1/20/1 pfc buffer-threshold
The following table describes the output elds displayed for the show interface pfc buffer-threshold
command:
Field
Description
queue Number of the queue
506 Data Center Bridging (DCB)