Users Guide

Enter any of the following keywords and the interface information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port/subport information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
all Display buer statistics for all ports
queue Enter the keyword queue followed by id for specic queue or keyword all.
priority-group Identier of the priority group in the range of 0 to 7.
Enter the keyword priority-group followed by {id} for specic priority group or
keyword all.
buer-info To display total buer information for the port interface, enter the keywords buffer-
info. To display a queue range, enter 0 to 14 for a specc queue or all.
Command Modes
EXEC
EXEC Privilege
Command History
Version Description
9.8(0.0) Removed the keyword port and added the keywords interface, and the variable
interface . Introduced on the S3048–ON and S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
Version 9.3(0.0) Introduced on the S6000 platform.
Usage Information The following table describes the elds in the output of the show command:
Field Description
Buer Accounting
Stats for Unit 0
Port 1 priority-group
0
Displays the counters that are calculated by the buer statistics tracking method for each
port per priority group on a particular stack member.
Max Shared Limit Maximum shared buer space allotted to the specic port for the corresponding stack
unit
Default Packet
Buer allocate for
the priority-group
The default packet buer size in KB that is associated with the particular priority group
Accounted Packet
Buer
Shared buer space that is in use by the packets
Example
Dell# show hardware stack-unit 1 buffer unit 0 port 1 priority-group 0 buffer-
info
----- Buffer Accounting Stats for Unit 0 Port 1 priority-group 0 -----
Maximum Shared Limit: 0
Default Packet Buffer allocate for the priority-group: 61440
Accounted Packet Buffer: 0
Debugging and Diagnostics 527