Users Guide

NOTE: If a range has VLAN, physical and port-channel interfaces, only commands related to physical
interfaces can be bulk congured. To congure commands specic to VLAN and port-channel only
those respective interfaces should be congured in a particular range.
Example (Single
Range)
This example shows a single range bulk conguration.
Dell(config)# interface range tengigabitethernet 1/1/1 - 1/7/3
Dell(config-if-range-te-1/1/1-1/7/3)# no shutdown
Example (Multiple
Range)
This example shows how to use commas to add dierent interface types to a range of interfaces.
Dell(config-if)# interface range tengigabitethernet 1/1/1 - 1/20/3,
hundredGigE 1/24 - 1/29
Dell(config-if-range-te-1/1/1-1/20/3,hu-1/24-1/29)# no shutdown
Example (Multiple
Range)
This example shows how to use commas to add VLAN and port-channel interfaces to the range.
Dell(config-if)# interface range tengigabitethernet 1/1/1 - 1/20/3,
tengigabitethernet 1/23/1 –1/24/4,
Vlan 2–100, Port 1–25
Dell(config-if-range-te-1/1/1-1/20/3,te-1/23/1-1/24/4,vl-2-100,po-1-25)# no
shutdown
Dell(config-if-range)#
Related Commands
• interface port-channel — congure a port channel group.
• interface vlan — congure a VLAN interface.
• show cong (from INTERFACE RANGE mode) — display the bulk conguration interfaces.
• show range — display the bulk conguration ranges.
• interface range macro (dene) — dene a macro for an interface-range.
interface range macro
(dene)
Denes a macro for an interface range and then saves the macro in the running conguration.
Syntax
define interface range macro name interface , interface , ...
Parameters
name Enter up to 16 characters for the macro name.
interface,
interface,...
Enter the keywords interface range and the interface information. Select the range
of interfaces for bulk conguration. You can enter up to six comma-separated ranges.
Spaces are not required between the commas. Comma-separated ranges can include
VLANs, port-channels, and physical interfaces.
•
For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port/subport information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
• For a Tunnel interface, enter the keyword tunnel then the tunnel ID. The range is
from 1 to 16383.
• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
Defaults None
Interfaces 677