Users Guide

Version Description
9.9(0.0) Added support to display the interface congurations corresponding to a range of ports.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on the E-Series.
8.1.1.0 Introduced on the E-Series.
7.8.1.0 Output augmented with diagnostic data for pluggable media.
7.7.1.0 Removed three elds in the output: Vendor Name, Vendor OUI, and Vendor PN.
7.6.1.0 Introduced on the C-Series and S-Series.
6.5.4.0 Introduced on the E-Series.
Usage Information
Use the show interfaces transceiver command to view the status of transceivers on all the interfaces in
the system.
The following describes the columns displayed in the output of the show interfaces transceiver
command:
Line Description
Rx Power
measurement type
Output depends on the vendor, typically either “Average” or “OMA” (Receiver optical
modulation amplitude).
Tx Power
measurement type
Output depends on the vendor, typically either “Supported” or “Not supported”.
Temp High Alarm
threshold
Factory-dened setting, typically in Centigrade. Value diers between SFPs and SFP+.
Voltage High Alarm
threshold
Displays the interface index number used by SNMP to identify the interface.
Bias High Alarm
threshold
Factory-dened setting. Value can dier between SFP and SFP+.
TX Power High
Alarm threshold
Factory-dened setting. Value can dier between SFP and SFP+.
RX Power High
Alarm threshold
Factory-dened setting. Value can dier between SFP and SFP+.
Temp Low Alarm
threshold
Factory-dened setting. Value can dier between SFP and SFP+.
712 Interfaces