Manualshelf

Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S6000 ON
51525354555657585960
VRRP Mode
To enable and configure Virtual Router Redundancy Protocol (VRRP), use VRRP mode. For more information, see Virtual Router
Redundancy Protocol (VRRP).
To enter VRRP mode:
1. To enable VRRP globally, verify that you are logged in to CONFIGURATION mode.
2. Enter the vrrp-group command, and then enter the VRRP group ID. The prompt changes to include conf-if-
interface-type-slot/port-vrid-vrrp-group-id.
CLI Basics 51