Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S6000 ON

111

112

113

114

115

116

117

118

119

120

Version Description

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

9.0.0.0 Introduced on the Z9000.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

8.1.1.0 Introduced on the E-Series ExaScale.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series

E-Series Original command.

Example

show environment

View S-Series and Z-Series system component status (for example, temperature or voltage).

Syntax

show environment [all | fan | stack-unit unit-id | pem ]

Parameters

all Enter the keyword all to view all components.

fan Enter the keyword fan to view information on the fans. The output of this command is chassis

dependent.

stack-unit unit-id Enter the keyword stack-unit then the unit-id to display information on a specic stack

member.

pem Enter the keyword pem to view only information on power entry modules.

Command Modes

• EXEC

• EXEC Privilege

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell Networking OS

Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.