Service Manual

0 0 QSFP 40GBASE-CR4-1M APF11200012UQQ Yes
0 1 QSFP 40GBASE-CR4-1M APF11200012UQQ Yes
0 2 QSFP 40GBASE-CR4-1M APF11200012UQQ Yes
0 3 QSFP 40GBASE-CR4-1M APF11200012UQQ Yes
0 4 QSFP 40GBASE-CR4-1M APF11200012UR1 Yes
0 5 QSFP 40GBASE-CR4-1M APF11200012UR1 Yes
0 6 QSFP 40GBASE-CR4-1M APF11200012UR1 Yes
0 7 QSFP 40GBASE-CR4-1M APF11200012UR1 Yes
0 8 QSFP 40GBASE-CR4-1M APF12300017GEY Yes
0 9 QSFP 40GBASE-CR4-1M APF12300017GEY Yes
0 10 QSFP 40GBASE-CR4-1M APF12300017GEY Yes
Related Commands
• show interfaces — displays the interface conguration.
• show interfaces transceiver — displays the physical status and operational status of an installed transceiver. The output also displays the transceiver’s serial number.
show memory
View current memory usage on the switch.
Syntax
show memory [stack-unit id]
Parameters
stack-unit id (OPTIONAL) Enter the keyword stack-unit then the stack unit ID of the S-
Series stack member to display memory information on the designated stack
member. The unit ID range from 0 to 11.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced this version of the command for the S-Series.
Usage Information The output for show memory displays the memory usage of LP part (sysdlp) of the system. The sysdlp is
an aggregate task that handles all the tasks running on the S-Series’ CPU.
Example
Dell#show memory stack-unit 1
Statistics On Unit 1 Processor
===========================
Control and Monitoring
115