Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S6000 ON

1271

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

E-Series legacy

command

Usage Information The oid-tree variable is a full sub-tree starting from 1.3.6 and cannot specify the name of a sub-tree or a

MIB. The following Example congures a view named rview that allows access to all objects under 1.3.6.1.

Example

Dell# conf

Dell#(conf) snmp-server view rview 1.3.6.1 included

Related Commands show running-cong snmp — displays the SNMP running conguration.

snmp-server vrf

Congures an SNMP agent to bind to a specic VRF.

Syntax

snmp-server vrf vrf-name

To undo the SNMP agent conguration, use the no snmp-server vrf vrf-name command.

Parameters

vrf vrf-name Enter the keyword vrf and then the name of the VRF to associate an SNMP

agent with that VRF.

Defaults Not Enabled.

Command Modes CONFIGURATION