Service Manual

Example
Dell(conf)#route-map dempsey
Dell(config-route-map)#
Related Commands show cong — displays the current conguration.
set as-path
To modify the AS path for border gateway protocol (BGP) routes, congure a lter.
Syntax
set as-path prepend as-number [... as-number]
To remove an AS-Path setting, use the no set as-path {prepend as-number | tag} command.
Parameters
prepend as-number Enter the keyword prepend and then enter up to eight AS numbers to be inserted
into the BGP path information. The range is from 1 to 65535.
Defaults Not congured.
Command Modes ROUTE-MAP
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage Information
You can prepend up to eight AS numbers to a BGP route.
This command inuences best path selection in BGP by inserting a tag or AS number into the AS_PATH
attribute.
Related Commands
match as-path — redistributes routes that match an AS-PATH attribute.
set automatic-tag
To automatically compute the tag value of the route, congure a lter.
Syntax
set automatic-tag
Access Control Lists (ACL)
221