Service Manual

Version Description
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names
are up to 16 characters long.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage Information
The community list used in the set comm-list delete command must be congured so that each
lter contains only one community. For example, the lter deny 100:12 is acceptable, but the lter deny
120:13 140:33
results in an error.
If the set comm-list delete command and the set community command are congured in the
same route map sequence, the deletion command (
set comm-list delete) is processed before the
insertion command (set community).
Related Commands
match community — redistributes routes that match the COMMUNITY attribute.
set community — species a COMMUNITY attribute.
set community
Allows you to assign a BGP COMMUNITY attribute.
Syntax
set community {community-number | local-as | no-advertise | no-export |
none} [additive]
To delete a BGP COMMUNITY attribute assignment, use the no set community {community-
number | local-as | no-advertise | no-export | none} command.
Parameters
community-number Enter the community number in AA:NN format where AA is the AS number (2
bytes) and NN is a value specic to that autonomous system.
local-AS Enter the keywords local-AS to drop all routes with the COMMUNITY attribute
of NO_EXPORT_SUBCONFED.
All routes with the NO_EXPORT_SUBCONFED (0xFFFFFF03) community
attribute must not be advertised to external BGP peers.
no-advertise Enter the keywords no-advertise to drop all routes containing the well-known
community attribute of NO_ADVERTISE.
Access Control Lists (ACL)
223