Service Manual

party-bus statistics | stack-port | ti-monitor | unit 0-1 {counters |
details | port-stats [detail] | register}}
Parameters
stack-unit stack-
unit {command-
option}
Enter the keywords stack-unit to select a particular stack member and then
enter one of the following command options to display a collection of data based
on the option entered. The range is from 1 to 6.
buer Enter the keyword buffer. To display the total buer statistics for the stack unit,
enter the keyword total-buffer. To display the buer statistics for a specic
unit, enter the keyword
unit and a unit number .
To display the buer statistics for a specic port, enter the keyword port and a
port number from 1 to 128.
To display total buer information for the port, enter the keywords buffer-info.
To display a queue range, enter 0 to 14 for a specc queue or all.
cpu data-plane
statistics
(Optional) Enter the keywords cpu data-plane statistics then the
keywords stack port and its number, from 1 to 128to display the data plane
statistics, which shows the High Gig (
Higig) port raw input/output counter
statistics to which the stacking module is connected.
cpu management
statistics
Enter the keywords cpu management statistics to display the counters of
the management port.
cpu party-bus
statistics
Enter the keywords cpu party-bus statistics, to display the Management
plane input/output counter statistics of the pseudo party bus interface.
drops [unit unit-
number [port port-
number | no]]
Enter the keyword drops to display internal drops on the selected stack member.
Enter the drops keyword to display internal drops on the selected stack member.
Option unit 0 followed by port 1-104 (in S6000) is based on internal/hardware port
number” and “option user-port 0-127 is to see the drop using user port numbering
convention.
fpga register Enter the keyword to display the register value of fpga resgister details in S4810,
Z9000 and S6000.
stack-port port-
number
Enter the keywords stack-port and a stacking port number to select a stacking
port for which to display statistics. The range is from 1 to 128.
unit unit-number
{counters | details |
port-stats [detail] |
register}
Enter the keyword unit then 0 to 3 and then enter one of the following keywords
to troubleshoot errors on the selected port-pipe and to give status on why a port is
not coming up to register level: counters, details, port-stats [detail],
or
register.
TI monitor Enter the unit keyword to show information regarding the TI register.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
450
Debugging and Diagnostics