Service Manual

Command History
Version Description
9.7(0.0) Introduced on the S6000-ON.
Version 9.3(0.0) Introduced on the S6000 platform.
Usage Information The following table describes the elds in the output of the show command:
Field Description
Buer Accounting Stats for Unit 0 Port 1 priority-
group 0
Displays the counters that are calculated by the
buer statistics tracking method for each port per
priority group on a particular stack member.
Max Shared Limit Maximum shared buer space allotted to the
specic port for the corresponding stack unit
Default Packet Buer allocate for the priority-group The default packet buer size in KB that is
associated with the particular priority group
Accounted Packet Buer Shared buer space that is in use by the packets
Example
Dell# show hardware stack-unit 1 buffer unit 0 port 1 priority-group 0
buffer-info
----- Buffer Accounting Stats for Unit 0 Port 1 priority-group 0 -----
Maximum Shared Limit: 0
Default Packet Buffer allocate for the priority-group: 61440
Accounted Packet Buffer: 0
show hardware system-ow
Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
Syntax
show hardware system-flow layer2 stack-unit id port-set number [counters]
Parameters
acl | qos For the selected stack member and stack member port-pipe, display which system
ow entry the packet hits and what queue the packet takes as it dumps the raw
system ow tables.
stack-unit id Enter the keywords stack-unit to select a stack member ID. The range is from 1
to 6.
port-set number
[counters]
Enter the keywords port-set with a port-pipe number.
The range is from 0 to 0.
(OPTIONAL) Enter the keyword counters to display hit counters for the selected
ACL or QoS option.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
456
Debugging and Diagnostics