Service Manual

compressed-cong Enter the keyword compressed-config to copy one le, after optimizing and
reducing the size of the conguration le, to another location. Dell Networking OS
supports IPv4 and IPv6 addressing for FTP, TFTP, and SCP (in the hostip eld).
le-url
To copy a le from
the internal FLASH
enter flash:// followed by the lename
To copy a le on an
FTP server
enter ftp://user:password@hostip/filepath
To copy a le on a
HTTP server
enter http: http://hostip/filepath
To copy a le on a
NFS mounted
system
enter nfsmount://<mount-point/filepath
NOTE: While switching to a remote NFS le
system, it is mandatory to specify the mount-point
that indicates the working directory on the NFS le
system. You cannot enter the root directory of the
remote NFS le system.
To copy the
running
conguration
enter the keyword running-config
To copy the
startup
conguration
enter the keyword startup-config
To copy using a
Secure Copy
(SCP),
enter the keyword scp:
• If you enter scp: in the source position, enter the
target URL;
• If you enter scp: in the target position, rst enter
the source URL;
To copy a le on
the external
FLASH
enter slot0:// followed by the lename
To copy a le on a
TFTP server
enter tftp://hostip/filepath
To copy a le from
an external USB
drive
enter usbflash://filepath
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON. Added the nfsmount:<mount-point>
parameters that enables you to mount a remote NFS le system.
File Management
55