Service Manual

userid:password@hostip/filepath)
stack-unit Sync image to the stack-unit
tftp: Copy from remote file system, IPv4 or IPv6, (tftp://
hostip/filepath)
usbflash: Copy from usbflash file system (usbflash://filepath)
Dell#
upgrade boot
Upgrade the bootash image or bootselector image.
Syntax
upgrade boot {all | bootflash—image | bootselector-image}stack-unit {0-5 |
all}{booted | flash: | ftp: | scp: | tftp: | usbflash:} {A: |B:}
Parameters
all Enter the keyword all to change both the bootash and bootselector images.
bootash-image Enter the keyword bootflash-image to change the bootash image..
bootselector-image Enter the keyword bootselector-image to upgrade the BIOS system image.
0–5 Enter the keywords 0–5 to upgrade only the mentioned stack-unit .
all Enter the keywords all to upgrade the member stack-units.
booted Enter the keyword booted to upgrade from the current image in the S6000.
ftp Enter the keyword ftp to follow it with the location of the source le in this
form: //userid:password@hostip/lepath, or press Enter to launch a prompt
sequence.
tftp Enter the keyword tftp to follow it with the location of the source le in this
form: //hostlocation/lepath, or press Enter to launch a prompt sequence.
ash Enter the keyword flash to follow it with the location of the source le in this
form: //lepath, or press Enter to launch a prompt sequence.
usbash Enter the keyword flash to follow it with the location of the source le in this
form: //lepath, or press Enter to launch a prompt sequence.
A Enter the keywordA to upgrade the bootash partition A
B Enter the keyword B to upgrade the bootash partition B.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version 9.0(0.0) Added support for IPv6 for the file-url parameter.
Version 8.3.19.0 Introduced on the S4820T.
File Management
75