Service Manual

show mac-address-table aging-time
Display the aging times assigned to the MAC addresses on the switch.
Syntax
show mac-address-table aging-time [vlan vlan-id]
Parameters
vlan vlan-id (OPTIONAL) Enter the keyword vlan then the VLAN ID to display the MAC
address assigned to the VLAN. The range is from 1 to 4094.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Added the vlan option on the E-Series.
7.7.1.0 Introduced on the C-Series and S-Series.
pre-6.2.1.1 Introduced on the E-Series.
Example
Dell#show mac-address-table aging-time
Mac-address-table aging time : 1800
Dell#
Related Commands show mac-address-table — displays the current MAC address conguration.
show mac learning-limit
Display MAC address learning limits set for various interfaces.
Syntax
show mac learning-limit [violate-action] [detail] [interface interface]
Parameters
violate-action (OPTIONAL) Enter the keywords violate-action to display the MAC learning
limit violation status.
detail (OPTIONAL) Enter the keyword detail to display the MAC learning limit in detail.
788
Layer 2