Service Manual

Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of the VRF to
congure this setting on that VRF.
NOTE: Applies to specic VRF if input is provided, else applies to Default
VRF.
static (OPTIONAL) Enter the keyword static to view static multicast routes.
group-address
[source-address]
(OPTIONAL) Enter the multicast group-address to view only routes associated
with that group. Enter the source-address to view routes with that group-address
and source-address.
count (OPTIONAL) Enter the keyword count to view the number of multicast routes
and packets.
snooping [vlan vlan-
id] [group-address
[source-address]]
Enter the keyword snooping to display information on the multicast routes PIM-
SM snooping discovers.
Enter a VLAN ID to limit the information displayed to the multicast routes PIM-SM
snooping discovers on a specied VLAN. The VLAN ID range is from 1 to 4094.
Enter a multicast group address and, optionally, a source multicast address in
dotted decimal format (A.B.C.D) to limit the information displayed to the multicast
routes PIM-SM snooping discovers for a specied multicast group and source.
summary (OPTIONAL) Enter the keyword summary to view a summary of all routes.
vlt (OPTIONAL) Enter the keyword vlt to view multicast routes with a spanned
incoming interface. Enter a multicast group address in dotted decimal format
(A.B.C.D) to limit the information displayed to the multicast routes for a specied
multicast group and optionally a source multicast address in dotted decimal format
(A.B.C.D) to limit the information displayed for a specied multicast source. Enter
the keyword count to display the total number of multicast routes with the
spanned IIF.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Added support for VRF. Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.2.(0.0) Added support for keyword vlt to the Z9000, S4810, and S4820T.
8.4.1.1 Support for the keyword snooping and the optional vlan vlan-id, group-
address, and source-address parameters were added on E-Series ExaScale.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
864
Multicast